Engine tube up, electronic fuel injection, abs, used car inspections, emission, oil change, engine repair, radiator, AC

Engine Tuning- is the adjustment, modification or design of internal combustion engines to yield optimal performance, to increase an engine's power output, economy, or durability.

On modern engines, equipped with electronic ignition and fuel injection, some of these tasks are automated, although they still require monitoring and periodic calibration.

Electronic Fuel injection - is a system for mixing fuel with air in an internal combustion engine. It is designed and calibrated specifically for the type(s) of fuel it will handle. The fuel injector consist of a nozzle and a valve: the power to inject the fuel comes from a pump or a pressure container farther back in the fuel supply.

An anti-lock braking system, or ABS - is a safety system which prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking. A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting attractively with the road surface as directed by driver steering inputs

Power windows and Door Locks - are automobile windows and door locks which can raised/lowered or luck/unlock by depressing a button or switch, as opposed to using a hand-turned crank handle or the push down knob for the door locks. In a typical installation, there is an individual switch at each window and a set of switches in the driver's door or a-frame pillar, so the driver can operate all the windows and door locks.

Drivability Diagnostics - is an overall report of the automobiles road worthiness. We will test drive the vehicle, inspect the engine and parts as well as the overall condition of the vehicle. We will also suggested any needed repairs and maintenance.

Clutch Service - It generally uses a driver-operated clutch, typically operated by a pedal or lever, for regulating torque transfer from the internal combustion engine to the transmission, and a gear-shift, operated by hand.

Transmission Repair and service - In motor vehicle applications, the transmission will generally be connected to the crankshaft of the engine. The output of the transmission is transmitted via drive shaft to one or more differentials, which in turn drive the wheels. While a differential may also provide gear reduction, its primary purpose is to change the direction of rotation..

Engine Service and Repairs - A vehicle's engine is unquestionably one of the most important parts of every vehicle. For this reason, car and engine manufacturing companies have been focusing all their efforts towards designing and creating highly powerful, efficient and high performance engines. But the complexity of the engine as a whole is just one thing. The quality and performance of every part and auxiliary parts of a car's engine is equally an important basis for the performance of an engine.

To be able to convert gasoline, or diesel in the case of diesel engines, effectively to motion, an engine should be equipped with well designed and properly functioning engine parts. Of special importance is the design of the cylinder head, the pistons and the piston rings, which are the main components of the combustion process. Also of primary importance are the various valves responsible for injecting fuel and allowing combustion by products to get out of the cylinder. Along with them are other engine parts like camshafts, crankshafts, oil pumps and others are also important for your engine's maximum output.

Brake Service and Repairs - When the brake is pushed the caliper containing piston pushes the pad towards the brake disc which slows the wheel down. On the brake drum it is similar as the cylinder pushes the brake shoes towards the drum which also slows the wheel down. All this parts have to work with assure precision and continuous use leads to ware and tare of this parts.

Cooling System (radiator) Service and Repairs - The cooling system on liquid-cooled cars circulates a fluid through pipes and passageways in the engine. As this liquid passes through the hot engine it absorbs heat, cooling the engine. After the fluid leaves the engine, it passes through a heat exchanger, or radiator, which transfers the heat from the fluid to the air blowing through the exchanger.

Wheel alignment - is part of standard automobile maintenance that consists of adjusting the angles of the wheels so that they are set to the car maker's specification. The purpose of these adjustments is to reduce tire wear, and to ensure that vehicle-travel is straight and true (without "pulling" to one side).

Electrical Diagnostics and Repairs - Electrical diagnostics software interfaces with your vehicle's engine control computer (ECU) to provide real-time diagnostics and troubleshooting data. Auto diagnostics software can reset the check engine light (CEL) in the dash, pull trouble codes stored in the ECU, and narrow down potential causes for problems. It can also be a useful tool for automotive maintenance.

Registered State Emission Facility - Arizona Department of Environmental Quality administers a mandatory vehicle emissions testing and repair program known as Vehicle Emissions Inspection Program (VEIP). VEIP emphasizes the importance of maintaining vehicle performance to lower emissions and extend the life of one of your most valuable assets - your car. .

Pre-Purchase Vehicle Evaluation - We will provide you with some peace of mind that the vehicle you're considering buying or selling is safe and reliable by a thorough evaluation performed by a completely unbiased Automotive Service Technician.

Air Conditioning Service and Repairs- The automotive air conditioner combines the refrigeration system with an air-distribution system and a temperature-control system to cool, clean, dry, and circulate passenger-compartment air. Cooling is provided by a mechanical vapor-compression refrigeration system with five major components: compressor, condenser, refrigerant flow-control valve, evaporator, and a receiver or accumulator that includes a desiccant.

Smog Check- A smog check is a test done on the exhaust system of a motor vehicle to determine how many pollutants, and of which type, the vehicle is emitting. The smog check also includes an assessment of other parts of the vehicle to make sure that they are in working order, especially those parts which pertain to emissions control.

Transmission, coolant, brake and power steering flushes - The transmission, coolant, brake and power steering flushes is a process that makes it possible to clear the majority of old fluids from the transmission, cooling system, brakes and power steering systems of a motor vehicle. This process also helps to remove residue of older fluids from the converters, coolers, and cooler lines that often are part of the many components of this systems. The benefit of conducting a regular systems flushing point to several ways that the function and life of this component systems may be enhanced.